3.6 Connecting to an Ethernet Network
Link LED
Green
1) Install the DisplayLink software drivers and plug in the adapter
2) Connect an RJ45 cable to the adapter and a network/router port
3) Link and Status LEDs should blink to indicate a connection
4) Check the documentation of your router to configure network access
Troubleshooting Tips
Reboot the computer and the router/cable modem
•
Check that the Link and Status LEDs are lit
•
Turn off all wireless connections
•
Update the USB drivers from the computer manufacturer
•
Test the patch cable with a different device or try another USB port
•
Windows OS
Search 'Device Manager' > Click on Network adapters > DisplayLink
Ethernet
Mac OS
Apple Menu > System Preferences > Network > USB 3.0 to VGA Adapter
with Gigabit Ethernet
USB 3.0 to VGA Adapter with Ethernet
www.cablematters.com
7
Status LED
Yellow