Table of Contents
Advertisement
Figure 42. Removing the cover presence switch and the bracket
Figure 43. Installing the cover presence switch and the bracket
9. Connect the new cover presence switch cable to the system board.
10. Reinstall the removed parts. To complete the replacement, see "Completing the parts replacement" on
page 55.
Replacing the system fan
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the computer stand. See "Replacing the computer stand" on page 16.
2. Remove the computer cover. See "Removing the computer cover" on page 18.
3. Remove the side I/O bezel. See "Replacing the side I/O bezel" on page 25.
4. Remove the system board shield. See "Replacing the system board shield" on page 26.
5. Remove the VESA mount bracket. See "Replacing the VESA mount bracket" on page 27.
6. Disconnect the system fan cable from the system board.
7. Replace the system fan.
.
Chapter 4
Replacing hardware
31
Advertisement
Table of Contents
