Figure 31. Installing the optical drive and storage drive cables
6. Connect the new optical drive and storage drive cables to the storage drive and the system board.
7. Reinstall the removed parts. To complete the replacement, see "Completing the parts replacement" on
page 55.
Replacing the side I/O bezel
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the computer stand. See "Replacing the computer stand" on page 16.
2. Remove the computer cover. See "Removing the computer cover" on page 18.
3. Replace the side I/O bezel.
Figure 32. Removing the side I/O bezel
.
Chapter 4
Replacing hardware
25