DNS Relayer Settings
Click on Servers in the menu bar, and then click DNS Relay below it. The DFL-200 contains
a DNS Relayer that can be configured to relay DNS queries from the internal LAN to the DNS
servers used by the firewall itself.
Enable DNS Relayer
Follow these steps to enable the DNS Relayer.
Step 1. Enable by checking the Enable DNS Relayer box.
Step 2. Enter the IP numbers that the DFL-200 should listen for DNS queries on.
Note: If "Use address of LAN interface" is checked, you do not have to enter an IP in IP
Address 1, as the firewall will know what address to use.
Click the Apply button below to apply the settings or click Cancel to discard changes.