Network Connections - D-Link DSM-120 User Manual

DSM-120 User's Manual

Network Connections

Select one of two ways to connect your DSM-120 to your network:
Wireless Connection
•
If you are connecting wireless using the
built-in antenna, then you do not need to
connect the supplied Ethernet cable.
For an optimal wireless connection,
place the antenna at a 90
shown in the image to the right.
RJ-45 Ethernet Connector
•
If you are connecting wired, insert the
supplied Ethernet cable into the Ethernet
network cable connector. Attach the other
end to a router or hub on your network.
Note: You may have an Ethernet cable plugged into the unit and also connect wirelessly.
Neither will interfere with the other, but only one network can be accessed at a time (wired
or wireless). The network connection type is selected in the Setup Wizard and can also
be changed by going to the Setup Menu. To access the Setup Menu, select Setup on the
menu and press Enter on the remote control.
D-Link Systems, Inc.
angle as
o
Connecting the DSM-120
38