2.5" Hard Drive; Installing An Optional 2.5" Hard Drive - D-Link DSM-120 User Manual

Version 1.0
Hide thumbs Also See for DSM-120:
Table of Contents

Advertisement

DSM-120 User's Manual

2.5" Hard Drive

2.5" Hard Drive

Installing an optional 2.5" Hard Drive

In order to use the Local Music option, you must have a standard IDE 2.5" Hard Drive installed
in your DSM-120. The Hard Drive Enclosure is located on the back of your DSM-120, simply
depress the locking tab and slide the cover off. Insert your 2.5" Hard Drive as shown in the
picture below, and close the cover. Your DSM-120 should be ready to play music from your
installed 2.5" Hard Drive.
Note: Hard Drive is not included with the DSM-120.
WARNING: You must unplug the
power from the DSM-120 before
inserting the Hard Drive.
Note: You must partition your 2.5" Hard Drive before you can use it in your DSM-120. Please
see page 62 for instructions on partitioning the Hard Drive.
Note: The DSM-120 only supports a 2.5" Hard Drive with a FAT or FAT32 file system.
Note: Please set your 2.5" Hard Drive in "Master" mode. If you leave the settings in "Cable
Select" or "Slave" mode, the DSM-120 will be unable to detect your hard drive..
D-Link Systems, Inc.
61

Advertisement

Table of Contents
loading

Table of Contents