Network Connections - D-Link MediaLounge DSM-320RD Owner's Manual

Connecting the DSM-320RD (continued)

Network Connections

Select one of two ways to connect a network to your DSM-320RD:
• RJ-45 Ethernet Connector
Connect the supplied Ethernet cable to
the network cable connector, and attach
the other end to the network.
• Wireless Antenna
Attach the supplied antenna by threading
it onto the antenna connector. Be sure
the antenna is secure and in an upright
position.
Note: You may have an Ethernet cable plugged into the unit and have the
wireless antenna connected. Neither will interfere with the other, but only
one network can be accessed at a time (wired or wireless). The network
connection type is selected in the Setup Wizard and can be changed by
going to the Setup Menu. To access the Setup Menu, press the SETUP
button on the remote control.
35