Table of Contents
Advertisement
Connecting The Cable Modem Continued...
Connect the coaxial cable provided for the Internet connection to the jack
labeled "CABLE IN" in the back of the cable modem unit.
Wait 1 to 3 minutes for the link light to
illuminate. If the link light does not glow,
please contact your broadband cable
company for further instructions.
Connect an Ethernet cable to the port
labeled "Ethernet" on the back of the cable
modem.
The final cable modem setup will look like the figures below:
Ethernet Cable Connection
*Note: Make sure the LINK light is on in
front of the modem
after
you connect the
Ethernet Cable to your computer.
2
Advertisement
Table of Contents
Need help?
Do you have a question about the DCM-100 and is the answer not in the manual?
Questions and answers