D-Link DSC-350 User Manual page 8

and then press "MODE/Power" button to set the shooting modes. There are
5 shooting modes.
1.Single snap shot mode (
picture every time you press the shutter release button.
2.Single snap shot with Self Timer mode (
camera will take one picture 10 seconds after you press the shutter
release button. The RED LED light will start to blink when you press the
shutter button and stop blinking after 10 seconds. Please use a tripod or a
steady support to hold the Camera.
3.Continuous snap shot mode (
(1image per second) after you press the shutter release button. The photo
number will be counted from 4 to 1 while storing the images. The 4
images will be accounted in one photo only.
4.Continuous snap shot with self timer mode (
the camera will take 4 pictures in 10 seconds delay after you press the
shutter release button. Please refer to the step of "single snap shot with
self timer mode" to take pictures.
5.Video Recording (
video recording with it's built-in 8 MB flash memory. Press and hold
shutter release button the camera will take a continuous video until you
release the button. When making a video recording, the Red LED light in
the front cover and Green LED light at the back cover will be blinking
continuously.
Select resolutions
Snapshot
This dual mode camera has 3 different resolutions to choose when taking
still images.
Press and hold the "Mode/Power" button first, and press shutter release
button to switch to a different resolution.
"SHI" mode: Under this mode, the images taken are in 1024x768
pixels resolution (by software interpolation).
) : In Single snap shot mode, you take 1
): The camera will take 4 images
): The camera can take around 4 minutes of
): Under this mode, the
): Under this mode,
- 8 -