Planet WAP-252N User Manual page 87

300mbps 802.11n outdoor wireless ap

Hide thumbs Also See for WAP-252N:

Table of Contents

User Manual of WAP-252N/WAP-552N

Step 2. In AP-2, change the default IP to the same IP range but different from AP-1. In this case, the IP is

changed to 192.168.1.252.

Step 3. In both APs, go to "Wizard" to configure it in Super WDS Mode.

Step 4. Go to "Wireless" and press Scan AP to search the other AP. You can also enter the MAC address and

SSID if you know what they are.

-79-

Table of Contents

Wap-552n