Planet WAP-252N User Manual page 82

300mbps 802.11n outdoor wireless ap

Hide thumbs Also See for WAP-252N:

Table of Contents

User Manual of WAP-252N/WAP-552N

Step2. In AP-2, change the default IP to the same IP range but different from AP-1. In this case, the IP is

changed to 192.168.1.252.

Step 3. In AP-1, go to "Wizard" to configure it to AP Mode. In AP-2, configure it to Repeater Mode.

AP-1

AP-2

Step 4. In AP-2, press Scan AP to search the AP-1. You can also enter the MAC address, SSID, encryption and

bandwidth if you know what they are.

-74-

Table of Contents

Wap-552n