Table of Contents
Advertisement
The page includes the following fields:
Object
SSID
Bandwidth
Channel
MAC
Encryption
AP Name
AP Location
AP1 enters the MAC address of AP2. And AP2 enters the MAC address of AP1. Then select the same Channel
to establish the connection.
Figure 5-15 Super WDS Mode
Description
It is the wireless network name. The default SSID is "PLANET_2.4G"
or "PLANET_5G"
Select the operating channel width, "20MHz" or "40MHz"
Select the operating channel you would like to use. The channel
range will be changed by selecting a different domain.
Enter the MAC address of slave AP
Select the wireless encryption. The default is "None"
Enter the name of AP
Enter the location of AP
-33-
User Manual of WAP-252N/WAP-552N
Advertisement
Table of Contents
