Table of Contents
Advertisement
The page includes the following fields:
Object
Repeater SSID
Lockmac
Authentication
Bandwidth
WDS Passthrough
Press Scan AP to show the root AP that you need to repeat and press Choice to select the AP.
Select the authentication and bandwidth which are the same as root AP to establish the connection.
Enter the root AP's SSID or press "Scan AP" to select
Check to lock the root AP' MAC address
Select the wireless encryption of root AP
Select the operating channel width, "20MHz" or "40MHz"
Check to enable WDS to pass through if the root AP is the same model as
client
Figure 5-9 Repeater Mode - Scan AP
Figure 5-10 Repeater Mode - Select AP
-27-
User Manual of WAP-252N/WAP-552N
Description
Advertisement
Table of Contents
