Table of Contents
Advertisement
4. 3D-NR (Digital Noise Reduction)
DNR function improves picture quality by ltering out signal noise which is generated
under the low light conditions. Sets o , low, middle or high level.
3DNR(3-dimensional noise reduction) which reduces the noise by the multi frames.
It is e ective at low light. Setting high is strength of noise reduction but the result
may occur in loss of sharpness and the tail e ect of a comet.
5. DAY & NIGHT
DAY/NIGHT is used to control the setting during day-time and night-time operation.
Select the mode according to the light condition and the camera types.
5-1. EXTERN
DAY or NIGHT is determined by the built-in light photo sensor.
Camera with IR LED must be set to EXTERNAL.
5-1-1. SMART IR
SMART IR can be set to reduce the saturation by the strong IR illumination in
the night in any menu of EXTERN, AUTO and B/W(NIGHT). Set to ON, SMART
IR is enabled and ANTI-SAT. level is controlled.
5-1-2. ANTI-SAT. (Available only with the SMART IR is ON)
Sets the anti saturation level 0~20. Setting high level avoids the saturation
strongly but the corners will be darker accordingly.
16
MENU V1. XX
1. ZOOM/FOCUS
2. EXPOSURE
3. SCENE ENHANCE
4. 3D-NR
5. DAY/NIGHT
6. PICT. ADJUST
7. SPECIAL
8. SYSTEM
9. EXIT
5. DAY&NIGHT
SMART IR
ON
ANTI-SAT.
10
DELAY
MIDDLE
IR LED CTRL
AUTO
RETURN
WDR
MIDDLE
AUTO
SAVE
llllllllllllllllllllll
Advertisement
Table of Contents
