D-Link DI-624S Manual page 83

DI-624S User's Manual
How can I setup my router to work with a Cable modem connection?
(continued)
Step 3
Power cycle the cable modem and router:
Turn the cable modem off (first) . Turn the router off Leave them off for 2 minutes.** Turn the cable
modem on (first). Wait until you get a solid cable light on the cable modem. Turn the router on. Wait
30 seconds.
** If you have a Motorola (Surf Board) modem, leave off for at least 5 minutes.
Step 4 Follow step 1 again and log back into the web configuration. Click the Status tab and click
the Device Info button. If you do not already have a public IP Address under the WAN heading, click
on the DHCP Renew and Continue buttons.
Step 1 Log into the web based configuration by typing in the IP
Address of the router (default:192.168.0.1) in your web browser.
The username is admin (all lowercase) and the password is blank
(nothing).
Step 2 Click the Home tab and click the WAN button. Select Static
IP Address and enter your static settings obtained from the ISP in
the fields provided.
If you do not know your settings, you must contact your ISP.
Step 3 Click on Apply and then click
Continue to save the changes.
Step 4 Click the Status tab and
click the Device Info button. Your IP
Address information will be displayed
under the WAN heading.
D-Link Systems, Inc.
Static Cable Connection
Frequently Asked Questions
83