Dhcp - D-Link DI-624S Manual

DI-624S User's Manual
Home > DHCP

DHCP

stands for Dynamic Host Control Protocol. The DI-624S has a built-in DHCP server. The DHCP
Server will automatically assign an IP address to the computers on the LAN/private network. Be sure
to set your computers to be DHCP clients by setting their TCP/IP settings to "Obtain an IP Address
Automatically". When you turn your computers on, they will automatically load the proper TCP/IP
settings provided by the DI-624S. The DHCP Server will automatically allocate an unused IP address
from the IP address pool to the requesting computer.You must specify the starting and ending address
of the IP address pool.
DHCP Server:
Starting IP Address:
Ending IP Address:
Lease Time:
Static DHCP:
MAC Address:
DHCP Client:
D-Link Systems, Inc.
Select Enabled or Disabled. The default setting is Enabled.
The starting IP address for the DHCP server's IP assignment.
The ending IP address for the DHCP server's IP assignment.
The length of time for the IP lease. Enter the Lease time. The default setting is
one hour.
Allows the DHCP server to assign the same IP address to a specific MAC address.
IP:
IP address specific to the client.
Enter the MAC Address.
Select a DHCP client from the pull-down list; click Clone to copy that MAC Address.
Using the Configuration Menu
22