Specifications - Rikon Power Tools 31-120 Operator's Manual

CHUCK:
KEYLESS ....................................................................................3/8"
MOTOR:
DRILL MOTOR VOLTAGE......................................................12v DC
NO LOAD SPEED (LOW/HIGH)..............0-350 RPM / 0-1,350 RPM
TORQUE.............................................................204 IN-LBS (23Nm)
TORQUE SETTINGS.....................................................................18
DRILL SETTINGS............................................................................1
BATTERY:
CELL TYPE .............................................................................. Li-Ion
VOLTAGE ..............................................................................12v DC
RUN CAPACITY........................................................................2.0Ah
CHARGER:
INPUT POWER (US/CAN) .........................110-120VAC /60Hz /30W
OUTPUT POWER (US/CAN).................................. 12v DC/ 540 mA
CHARGE TIME ............................................................................. 1h
CORD LENGTH ..........................................................................5FT
WEIGHT (w/BATTERY).....................................................2 lbs. 3 oz.
NOTE: The specifications, photographs, drawings and information in this manual represent the model
when the manual was prepared. Changes and improvements may be made at any time, with no
obligation on the part of Rikon Power Tools to modify previously delivered units. Reasonable care has
been taken to ensure that the information in this manual is correct, to provide you with the guidelines
for the proper safety, assembly and operation of this machine.
Page 8

SPECIFICATIONS