Getting Started - D-Link AirPlus DI-614+ Manual

Getting Started

With its default settings, the DI-614+, when activated, will connect with other D-
Link Air or AirPlus products, right out of the box.
Please refer to the following
sections of this manual for
additional information about
setting up a network:
Networking Basics - learn how
to check and assign your IP
Address; share printers and
files.
Using the Configuration Menu
- learn the settings for the
DI-614+, using the web-based
interface.
For a typical network setup at home (as shown above), please do the following:
You will need broadband Internet access (a Cable or DSL subscription line
into your home or office).
Consult with your Cable or DSL provider for proper installation of the modem.
Connect the Cable or DSL modem to the DI-614+ wireless broadband router
(see the Quick Installation Guide included with the DI-614+).
If you are connecting a desktop computer to your network, you can install the
D-Link DFE-530TX+ ethernet adapter into an available PCI slot. (See the
Quick Installation Guide included with the DWL-530TX+.)
If you are connecting a laptop computer to your network, install the driv-
ers for the Ethernet Cardbus adapter (e.g., D-Link DWL-650+) into a laptop
computer.(See the Quick Installation Guide included with the DWL-650+.)
2
4
3
1
5
9