D-Link AirPlus DI-614+ Manual page 36

Using the Configuration Menu
Tools> Admin
There are two accounts that can access the Broadband Router's Web-Management
interface. They are admin and user. Admin has read/write access while user has read-
only access. User can only view the settings but cannot make any changes. It is rec-
ommended that you change the admin password from the default setting. The default
password is blank (no password).
Password
Remote
Management
IP Address
Port
To change the admin and user passwords, enter in the old
password, and enter the new password twice to confirm.
Remote Management allows the device to be configured
through the WAN (Wide Area Network) port from the Internet
using a web browser. A username and password is still required
to access the browser-based management interface.
Internet IP Address of the computer that has access to the
DI-614+. If the IP Address is set to 0.0.0.0, this allows all Internet
IP addresses to access the DI-614+.
The port number used to access the DI-614+.
E.g., http://x.x.x.x:80, where x.x.x.x. is the WAN IP address of
the DI-614+ and 80 is the port used for the Web Management
interface.
36