Installing The Back Cover - Dell OptiPlex 5260 Service Manual
Hide thumbs
Also See for OptiPlex 5260:
- Stand installation manual (19 pages) ,
- Setup and specifications manual (45 pages) ,
- Installation manual (15 pages)
Table of Contents
Advertisement
Installing the back cover
1
Place the back cover on the system.
2
Press and hold the tab [1], and align the notches on the back cover with the slots on the middle frame.
3
Slide the back cover in the direction shown to lock the back cover tab under the latch on the system-board shield [2].
24
Removing and Installing components
Advertisement
Table of Contents
