Installing the pop-up camera
1
Follow the procedure in
2
To install the pop-up camera module:
a
Replace the camera module along with the camera cable in the slot on the pop-up camera assembly [1].
b Snap the pop-up camera assembly in place to the tab [2].
3
To install the pop-up camera bezel:
a
Align the screw slots on the pop-up camera bezel with the screw slots on the pop-up camera assembly [1].
b Replace the three screws (M3x5) that secure the pop-up camera bezel to the pop-up camera assembly [2].
c
To retract the pop-up camera, press the top of the pop-up camera assembly[3].
50
Removing and Installing components
After working inside your
computer.