System Board Shield; Removing The System Board Shield - Dell OptiPlex 5270 All-in-One Service Manual

4. Install the following components:
a) Back cover
b) Stand
5. Follow the procedure in

System board shield

Removing the system board shield

1. Follow the procedure in
2. Remove the following components:
a) Stand
b) Back cover
3. Remove the five (M3x5) screws that secure the system board shield to the display assembly base [1].
4. Lift the system board shield off the display assembly base [2].
After working inside your computer.
Before working inside your computer.
Removing and Installing components 27