Stand; Removing The Stand - Dell OptiPlex 5270 All-in-One Service Manual

3. Install the Stand.
4. Follow the procedure in

Stand

Removing the stand

The following procedure applies only to systems that are shipped with a Height adjustable stand (HAS) stand :
1. Follow the procedure in
2. To avoid damaging the display, place the system on a flat, soft, and clean surface .
3. To remove the stand:
a) Press and slide the release tab forward on the cover [1].
b) Hold the tab in the release position and lift the stand upward [2].
c) Slide downward to lift the stand off the back cover [3].
20 Removing and Installing components
After working inside your computer
Before working inside your computer.