Input And Output Bracket; Removing The Input And Output Bracket - Dell OptiPlex 5270 All-in-One Service Manual

3. Install the following components:
a) Base cover
b) System board shield
c) Back cover
d) Stand
4. Follow the procedure in

Input and Output bracket

Removing the Input and Output bracket

1. Follow the procedure in
2. Remove the following components:
a) Stand
b) Back cover
c) System board shield
d) Base cover
3. Release the PSU cable to remove the Input and Output (I/O) bracket.
4. To release the PSU cable:
a) Remove the single (M3x5) screw securing the power supply socket to the Input and Output (I/O) bracket [1].
b) Slide the power supply socket away to remove it from the system [2].
c) Unroute the power supply cables from the retention clips in the chassis [3].
64 Removing and Installing components
After working inside your computer.
Before working inside your computer.