Connecting Eco Ps-2/Ps-2Dc Gps And Remote Control Socket - di-GPS Eco ProSumer 2 User Manual

CONNECTING ECO PS-2 GPS AND REMOTE CONTROL SOCKET
NOTE

ECO PS-2 GPS cannot be turned on when it is not connected to the camera.

Please refer to the user manual of your DSLR for more information on taking photograph with a GPS receiver.

Please make sure the camera is turned off before disconnecting ECO PS-2 GPS. Do not connect or disconnect ECO PS-2
GPS while the camera is on. Failure to observe this precaution could cause a malfunction of the camera.

Do not carry the camera by ECO PS-2 GPS or subject the camera or the unit to physical shocks while the unit is
connected. Failure to observe this precaution could result in physical damage of the unit.
DI-GPS® IS A REGISTERED TRADEMARK OR A TRADEMARK OF DAW N TECHNOLOGY LIMITED.
NIKON D5, D4, D4S, D3, D3S , D3X, D500,D810A, D810, D8 00, D800E, D700, D300, D300S, D2XS, D2X, D2HS,
D200 D5600, D3400, D7200, D5500, D3300, DF, D5300, D610, D600, D75 0, D7100, D7000, D5100, D5000, D3200,
D3100, D90 ARE REGISTERED TRADEMARK OR A TRADEMARK OF NIKON CORPORATION IN T HE UNITED
STATES AND/OR OTHER COUNTRIES.
FUJIFILM AND S5 PRO ARE REGISTERED TRADE MARK OR A TRADEMARK OF FUJIFILM U.S.A., INC. IN THE
UNITED STATES AND/OR OTHER COUNTRIES.
Attach the strip to the eyelet of camera.
Insert the ECO PS-2 GPS to the remote terminal of the DSLR
camera body.
An optional remote control accessories (2.5mm jack) can be
connected to the remote terminal of ECO PF2 GPS for remote
shutter release.
V1.2
6