Power Supply; Power Mode Switch - di-GPS Eco ProSumer 2 User Manual

POWER SUPPLY

ECO PS-2 GPS is not equipped with battery. Power of the GPS is supplied by the camera's battery via
the 10-pin connector.

POWER MODE SWITCH

Auto Mode: The GPS is switched on or off with the camera generally. If the function, Auto Meter Off
(1)
or Standby time on the camera is enabled, the GPS goes off when the exposure meters of the
camera turn off automatically according to the time set
Always-On Mode: The GPS is steadily on regardless of whether the camera is on or off. This can
prevent the GPS receiver from deactivating with the camera or the exposure meters to allow a
continuous reception of GPS data. The device is immediately ready for shooting photos with GPS data
as the camera is turned on again.
Power mode LED
DI-GPS® IS A REGISTERED TRADEMARK OR A TRADEMARK OF DAW N TECHNOLOGY LIMITED.
NIKON D5, D4, D4S, D3, D3S , D3X, D500,D810A, D810, D8 00, D800E, D700, D300, D300S, D2XS, D2X, D2HS,
D200 D5600, D3400, D7200, D5500, D3300, DF, D5300, D610, D600, D75 0, D7100, D7000, D5100, D5000, D3200,
D3100, D90 ARE REGISTERED TRADEMARK OR A TRADEMARK OF NIKON CORPORATION IN T HE UNITED
STATES AND/OR OTHER COUNTRIES.
FUJIFILM AND S5 PRO ARE REGISTERED TRADE MARK OR A TRADEMARK OF FUJIFILM U.S.A., INC. IN THE
UNITED STATES AND/OR OTHER COUNTRIES.
(2)
DESCRIPTION
 Auto Mode
 Always On Mode
.
V1.2
7