Connecting Eco Pf1-M Gps And Remote Control Socket - di-GPS Eco ProFessional PF1-M User Manual

CONNECTING ECO PF1-M GPS AND REMOTE CONTROL SOCKET

NOTE

ECO PF1-M GPS cannot be turned on when the camera is not connected.

Please refer to user manual of your DSLR for more information on taking photographs with a GPS receiver.

Be sure to turn off your camera before disconnecting ECO PF1-M GPS. Do not connect or disconnect ECO PF1-M GPS
while the camera is on. Failure to observe this precaution could cause a malfunction of the camera.

Do not carry the camera by ECO PF1-M GPS or subject the camera or the unit to physical shocks while the unit is
connected. Failure to observe this precaution could result in physical damage of the unit.

Re-place the cover on the camera when the terminal is not in use.
DI-GPS® IS A REGISTERED TRADEMARK OR A TRADE MARK OF DAW N TECHNOL OGY LIMITED.
NIKON D2HS, D2X, D2XS, D200, D3, D3S, D3 X, D300, D300S, D600, D700, D800, D90, D3100, D3200, D5000,
D5100, D7000, D7100 AND P7700 ARE REGISTERED TRADEMARK OR A TRADEMARK O F NIKON
CORPORATION IN THE U NITED STATES AND/OR OTHER COUNTRIES.
FUJIFILM AND S5 PRO ARE REGISTERED TRADE MARK OR A TRADEMARK OF FUJIFILM U.S.A., INC. IN THE
UNITED STATES AND/OR OTHER COUNTRIES.
Direct connect ECO PF1-M GPS to the 10 pin remote terminal of
the DSLR camera body.
How the strip be
attached
An optional Nikon remote control accessories (MC-30, MC-36)
can be connected to the 10 pin remote terminal of ECO PF1-M
GPS for remote shutter release. Remove the 10 pin remote
terminal cover before using the Nikon remote control
accessories.
V1.0
6