D-Link DGS-3224TG User Manual page 86

The reboot options are as follows:
•
Reboot – Simply restarts the switch. Any configuration settings not saved using Save Changes
from the main menu will be lost. The switch's configuration will be restored to the last configuration
saved in NV-RAM.
•
Save Configuration & Reboot – Saves the configuration to NV-RAM (identical to using Save
Changes) and then restarts the switch.
•
Reboot & Load Factory Default Configuration – Restarts the switch using the default factory
configuration. All configuration data will be lost. This is identical to using Factory Reset and then
Reboot.
•
Reboot & Load Factory Default Configuration Except IP Address – Restarts the switch using the
default factory configuration, except the user configured IP address will be retained. All other
configuration data will be lost.
A confirmation screen will appear:
Figure 6-51. System Reboot menu
76
DGS-3224TG Gigabit Ethernet Switch User's Guide