D-Link DES-6000 Firmware Update Manual page 2

D-link des-6000: product support bulletin

Hide thumbs Also See for DES-6000:

Press RESET SWITCH TO START UPDATE to initiate the update

sequence.

Restart the switch. Check the version of PROM code. is it the correct

version you want to update?

Update the Runtime code:

Modify the configure file (25.cfg) for RunTime code updating

Specify the directory path and image file name for RunTime code.

#Code_type=PROM

#Image_file="d:\des6000\6000prom.b13"

Code_type=RUNTIME

Image_file="d:\des6000\6000run.b41"

#Code_type=CONFIG

#Image_file="g:\d-link\des-60~1\basic_25.bc"

Save your modification and Enable your TFTP server.

Enter console program; select Update Firmware and Configuration

Files in the main menu.

Set the Software Update Mode to "Network".

Specify the IP address of your TFTP server.

In the Configuration File field, Set Use Config Files to "Enable"

In File Name field, specify the path and file name of config file. The

following screen appears:

Written by: Simon Hsu

Dept. Technical Support

Updated: March 23, 2001