D-Link DES-3526 Command Line Interface Reference Manual page 207

delete authen server_group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the server group "group_1":
DES-3526:4#delete server_group group_1
Command: delete server_group group_1
Success.
DES-3526:4#
show authen server_group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view authentication server groups currently set on the Switch.
DES-3526 Layer 2 Fast Ethernet Switch
Used to delete a user-defined authentication server group.
delete authen server_group <string 15>
This command will delete an authentication server group.
<string 15> - Enter an alphanumeric string of up to 15 characters to
define the previously created server group to be deleted.
Only administrator-level users can issue this command.
Used to view authentication server groups on the Switch.
show authen server_group <string 15>
This command will display authentication server groups currently
configured on the Switch.
This command will display the following fields:
Group Name: The name of the server group currently configured on
the Switch, including built in groups and user defined groups.
IP Address: The IP address of the server host.
Protocol: The authentication protocol used by the server host.
<string 15> - Enter an alphanumeric string of up to 15 characters to
define the previously created server group to be viewed.
Entering this command without the <string> parameter will display all
authentication server groups on the Switch.
None.
199