Canon DADF-AG1 Service Manual page 48

5
Adjustment > Overview (DADF) > Outline
Overview (DADF)
Outline
This machine has the following adjustment items. Carry out each adjustment
after replacing the relevant parts.
Adjustment type Parts to
replace
Height adjustment Hinge
Adjusting the Tray Width -
Perpendicularity adjustment Hinge
Reading position adjustment Platen roller
Side registration adjustment -
Trailing edge registration adjustment -
Magnification adjustment Motor/roller
White level position adjustment Platen roller
CAUTION:
Carry out all the above adjustments after removing the DADF from the reader unit.
5 Adjustment > Overview (DADF) > Outline
Remarks Reference
Refer to page 5-3
During installation only Refer to page 5-6
Refer to page 5-6
Refer to page 5-7
During installation only Refer to page 5-8
During installation only Refer to page 5-8
Refer to page 5-9
Refer to page 5-9
T-5-1
5-2
5-2