JVC KD-DV7206 Instructions Manual page 5

Before operating the unit — Cancel the display demonstration and set the clock
• See also page 26.
~
Turn on the power.
Ÿ
Enter the PSM settings.
! ⁄
]
Cancel the display demonstrations
Select "DEMO," then "DEMO OFF."
Set the clock
Select "CLOCK H" (hour), then adjust the hour.
Select "CLOCK M" (minute), then adjust the minute.
@
Finish the procedure.
How to detach/attach the control panel
Lever
When the power is turned off: Check the current clock time
When the power is turned on: Change the display information
Detaching...
CAUTION:
The lever comes out if you pressed the 0 button while the
panel is detached. If this happens, push the lever back into lock
position before attaching the panel.
5
Attaching...