JVC KD-DV7206 Instructions Manual page 27

Indication
TAG DISP
Tag display
NTSC/PAL* 3
Video format
REAR SPK*
4
Rear speaker output
AMP GAIN
Amplifier gain control
IF BAND
Intermediate frequency
filter
1
* Some characters or symbols will not be shown correctly (or will be blanked) on the display.
* Displayed only when one of the following sources is selected—FM, AM, DISC, USB, or LINE IN.
2
* 3 The newly selected video format takes effect only after you turn on the power again, reload the disc,
or change the source.
* Displayed only when Dual Zone is activated (see page 23).
4
Item
• TAG ON [Initial] : Shows the tag while playing MP3/WMA/WAV tracks.
• TAG OFF : Cancels.
• PAL [Initial] : Select this if your monitor is of the PAL color system.
• NTSC : Select this if your monitor is of the NTSC color system.
• ON [Initial] : Select this to turn on the rear speaker output.
• OFF : Cancels.
• LOW PWR : VOL 00 – VOL 30 (Select if the maximum power of each speaker
is less than 50 W to prevent the speaker from being damaged.)
• HIGH PWR
: VOL 00 – VOL 50
[Initial]
• AUTO [Initial] : Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
• WIDE : Subject to interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
Setting, [reference page]
27
SETTINGS