JVC KD-DV7206 Instructions Manual

JVC KD-DV7206 Instructions Manual

Dvd/cd receiver
Hide thumbs Also See for KD-DV7206:


For canceling the display demonstration, see page 5.
For installation and connections, refer to the separate manual.


Table of Contents

Summary of Contents for JVC KD-DV7206

  • Page 1 DVD/CD RECEIVER KD-DV7206/KD-DV7205 For canceling the display demonstration, see page 5. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0375-005A...
  • Page 2 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.
  • Page 3: Table Of Contents

    WARNINGS: CONTENTS To prevent accidents and damage Introduction ..........4 • DO NOT install any unit in locations where; – it may obstruct the steering wheel and OPERATIONS gearshift lever operations. Basic operations – it may obstruct the operation of safety devices •...
  • Page 4: Introduction

    Introduction Disc type Recording format, file type, etc Playable DVD-Video DVD-Audio DVD-ROM DVD Recordable/Rewritable DVD-Video (DVD-R /-RW, +R/+RW DivX Video MPEG-1/MPEG-2 Video MP3/WMA/WAV JPEG DVD-VR, +VR DVD-RAM Dual Disc DVD side Non-DVD side CD/VCD Audio CD (CD-DA), DTS-CD VCD (Video CD) CD-Text CD-ROM CD-I (CD-I Ready)
  • Page 5 Before operating the unit — Cancel the display demonstration and set the clock • See also page 26. When the power is turned off: Check the current clock time When the power is turned on: Change the display information Turn on the power. Ÿ...
  • Page 6: Basic Operations

    Basic operations — Control panel Select the source. • Turn on the power. FM/AM = DISC* = USB* = CD-CH*/IPOD*/ • Turn off the power [Hold]. D.PLAYER* (or EXT IN) = LINE IN =(back to the • Attenuate the sound (if the power is on). beginning) •...
  • Page 7: Remote Controller (Rm-Rk230)

    Display window Source display/Preset No./ Track No./Folder No./ Main display Disc No./Chapter No. (Time, menu, playback information) Tuner reception indicators Dual Zone indicator Loudness indicator Track information indicators Track indicator Disc type indicators Equalizer indicator Playback mode/item indicators (Random/Repeat) Playback source indicators Sound mode indicators •...
  • Page 8 MONITOR CONTROL menu selecting buttons.)* • 4 / ¢ (in menu selecting mode) Monitor control buttons • Used for a JVC monitor—KV-MR9010, – Selects an item if pressed briefly. (Then, press ∞ to confirm the KV-MH6510, KV-M706, or KV-M705. selection.) DVD/RECEIVER CONTROL –...
  • Page 9 • Shows the on-screen bar. How to select a number • Also function as the /TITLE button To select a number from 0 – 9: when pressed with SHIFT button (see pages 13 and 14). • DVD-Video/DivX: Shows disc menu. •...
  • Page 10: Listening To The Radio

    Listening to the radio Change the display information * If no name is assigned to a station, “NO NAME” appears. To assign a name to a station, see page 30. Select preset station. Select “FM/AM.” Ÿ Select the bands. Lights up when receiving an FM stereo broadcast with sufficient signal strength.
  • Page 11: Disc Operations

    Disc operations Before performing any operations... Turn on the monitor to watch the playback picture. If you turn on the monitor, you can also control playback of other discs by referring to the monitor screen. (See pages 15 – 18.) The disc type is automatically detected, and playback starts automatically (for DVD: automatic start depends on its internal program).
  • Page 12 Operations using the control panel Pressing (or holding) the following buttons allows you to... Disc type (Number buttons) Press: Select chapter Select title During stop: Locate title Hold: Reverse/fast-forward During play/pause: Locate chapter chapter Press: Select track Locate particular track directly —...
  • Page 13 Operations using the remote controller—RM-RK230 : Stop play : Pause (Frame by frame playback if pressed during pause.) : Start play (10-second review if pressed during play.) : Reverse/forward chapter search • Slow motion during pause. No sound can be heard.
  • Page 14 : Stop play : Pause (Frame by frame playback if pressed during pause.) : Start play : Reverse/forward track search While holding : Press: Select track : Select track (within the same folder) Hold: Reverse/fast-forward track search , then : Select folder directly : Select folder : •...
  • Page 15 Operations using the on-screen bar (DVD/VCD/DivX/MPEG Video) These operations are possible on the monitor using the remote controller. Show the on-screen bar (see page 16). (twice) Ÿ Select an item. Make a selection. If pop-up menu appears... • To cancel pop-up menu, press •...
  • Page 16 On-screen bar Ex.: DVD-Video Information Operation Disc type Playback status • DVD-Video/DTS-CD: Audio signal format type Play and channel Forward/reverse search • VCD: Forward/reverse slow-motion Playback mode Pause DVD-Video: T. RPT: Title repeat Stop C. RPT: Chapter repeat Operation icons T.
  • Page 17 Operations using the control screen (DivX/MPEG Video/MP3/WMA/WAV/CD) These operations are possible on the monitor using the remote controller. Show the control screen. DivX/MPEG Video: Press during play. MP3/WMA/WAV/CD: Automatically appear when you insert a disc. Ÿ Select “Folder” column or “Track” column (except for CD). Select a folder or track.
  • Page 18 Operations using the list screen (DivX/MPEG Video/MP3/WMA/WAV) These operations are possible on the monitor using the remote controller. Before playing, you can display the folder list/track list to confirm the contents and start playing a track. Display the folder list while stop. Ÿ...
  • Page 19: External Devices

    Listening to the USB memory While the power is on... USB input terminal USB memory This unit can play MP3/WMA tracks stored in a After pressing , press the following USB memory. buttons to... All tracks in the USB memory will be played Skip 10 tracks (within the same folder) repeatedly until you change the source.
  • Page 20: Listening To The Cd Changer

    Listening to the CD changer Change the display information (see page 11) It is recommended to use a JVC After pressing , press the following MP3-compatible CD changer with your unit. buttons to... • You can only play conventional CDs Skip 10 tracks (MP3: within the same (including CD Text) and MP3 discs.
  • Page 21: Listening To The Ipod®/D. Player

    Listening to the iPod®/D. player Change the display information Before operating, connect the interface adapter • If a track is selected, playback starts (KS-PD100 or KS-PD500) to the CD changer automatically. 4/¢ jack of this unit. • Holding can skip 10 items at a time.
  • Page 22: Listening To The Other External

    MD player, etc. MD player, etc. Unit (see page 26 of the MD player, etc. ”EXT IN” setting) JVC CD changer, [20] CD changer jack Apple iPod, [21] (see page 26 of the ”EXT IN” setting) JVC D. player, [21]...
  • Page 23: Dual Zone Operations

    Dual Zone operations You can connect an external audio equipment to the 2nd AUDIO OUT plug on the rear, and play back a disc separately from the source selected on the unit. You can activate Dual Zone while listening to any source. •...
  • Page 24: Selecting A Preset Sound Mode

    Selecting a preset sound mode Preset frequency level settings: Repeat steps to adjust the other frequency bands. Preset equalizing values Sound mode Store the adjustments in the respective mode. USER ROCK +03 +02 +01 +02 +01 CLASSIC +01 +03 +01 POPS +01 +02 HIP HOP...
  • Page 25: General Settings - Psm

    Adjusting the sound General settings — PSM You can change PSM (Preferred Setting Mode) items listed in the table that follows. Adjust the level. Enter the PSM settings. Select a PSM item. (fader) R06 to F06 Adjust the front and rear speaker balance.
  • Page 26 • HPF OFF [Initial] : Cancels. EXT IN* • CHANGER [Initial] : To use a JVC CD changer, [20], or an Apple iPod/a JVC D. player, External input [21]. • EXT IN : To use any other external component than the above, [22].
  • Page 27 Indication Item Setting, [reference page] TAG DISP • TAG ON [Initial] : Shows the tag while playing MP3/WMA/WAV tracks. Tag display • TAG OFF : Cancels. NTSC/PAL* • PAL [Initial] : Select this if your monitor is of the PAL color system. Video format •...
  • Page 28: Disc Setup Menu

    Disc setup menu These operations are possible on the monitor using the remote controller. Enter the disc setup menu while stop. Ÿ Select a menu. Select an item you want to set • To cancel pop-up menu, press ⁄ Select an option. To return to normal screen Menu Item...
  • Page 29 Menu Item Setting MONITOR TYPE Select the monitor type to watch a wide screen picture on your monitor. OSD POSITION Select the on-screen bar position on the monitor. • 1 : Higher position • 2 : Lower position (Guidance below the disc setup menu will disappear.) FILE TYPE Select the file type to play.
  • Page 30: Assigning Names To The Sources

    Assigning names to the sources You can assign names to station frequencies and Assign a title. CDs (both in this unit and in the CD changer). 1 Select a character. 2 Move to the next (or previous) character position. Maximum number of Sources 3 Repeat steps 1 and 2 until you finish characters...
  • Page 31: Maintenance

    Maintenance To keep discs clean How to clean the connectors A dirty disc may not play correctly. Frequent detachment will deteriorate the If a disc does become dirty, wipe it connectors. with a soft cloth in a straight line To minimize this possibility, periodically wipe from center to edge.
  • Page 32: More About This Unit

    More about this unit Playing Recordable/Rewritable discs General • This unit can recognize a total of 3 500 files Turning on the power and 250 folders (a maximum of 999 files per • By pressing SRC on the unit, you can also folder).
  • Page 33 When operating an iPod or a D. player, some operations may not be performed correctly or as intended. In this case, visit the following JVC web site: For iPod users: <http://www.jvc.co.jp/ english/car/support/ks-pd100/index.html> For D. player users: <http://www.jvc.co.jp/ english/car/support/ks-pd500/index.html> Continued on the next page...
  • Page 34 Title assignment On-screen guide icons • If you try to assign titles to more than 30 During playback, the following guide icons station frequencies or 30 CDs, “NAMEFULL” may appear for a while on the monitor. appears. Delete unwanted titles before assignment.
  • Page 35 Output signals through the DIGITAL OUT terminal Output signals are different depending on the “DIGITAL AUDIO OUTPUT” setting on the setup menu (see page 29). Output Signal Playback Disc STREAM/PCM DOLBY DIGITAL/PCM PCM ONLY DVD-Video 48 kHz, 16/20/24 bits Linear PCM 48 kHz, 16 bits stereo Linear PCM 96 kHz, Linear PCM Dolby Digital...
  • Page 36 Language codes Code Language Code Language Code Language Code Language Code Language Afar Persian Greenlandic Occitan Sesotho Abkhazian Finnish Cambodian (Afan) Oromo Sundanese Afrikaans Fiji Kannada Oriya Swahili Ameharic Faroese Korean (KOR) Panjabi Tamil Arabic Frisian Kashmiri Polish Telugu Assamese Irish Kurdish Pashto, Pushto...
  • Page 37: Troubleshooting

    Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptom Remedy/Cause • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. •...
  • Page 38 Symptom Remedy/Cause • Disc cannot be played back. • Change the disc. • Record the tracks using a compliant application in the appropriate discs (see page 4). • Add the extension code <.divx>, <.div>, <.avi>, <.mpg>, <.mpeg>, <.mp3>, <.wma>, or <.wav> to the file names.
  • Page 39 Symptom Remedy/Cause • “NO DISC” appears on the display. Insert a disc into the magazine. • “NO MAG” appears on the display. Insert the magazine. • “RESET 8” appears on the display. Connect this unit and the CD changer correctly and press the reset button of the CD changer.
  • Page 40: Specifications

    Specifications Maximum Power Front/Rear: 50 W per channel Output: Continuous Power Front/Rear: 19 W per channel into 4 Ω, 40 Hz to Output (RMS): 20 000 Hz at no more than 0.8% total harmonic distortion Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Equalizer Control Frequencies: 60 Hz, 150 Hz, 400 Hz, 1 kHz, 2.4 kHz, 6 kHz,...
  • Page 41 DivX: Video: Max. Resolution: 720 × 480 pixels (30 fps) 720 × 576 pixels (25 fps) Audio: Bit Rate: 32 kbps – 320 kbps Sampling Frequency: MPEG-1: 32 kHz, 44.1 kHz, 48 kHz MPEG-2: 16 kHz, 22.05 kHz, 24 kHz MPEG Video: Video: Max.
  • Page 42 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit © 2006 Victor Company of Japan, Limited 0106DTSMDTJEIN...

This manual is also suitable for:


Table of Contents