Table of Contents
Advertisement
Climate class
The appliance is designed for use within
a certain climate range (ambient tem-
peratures) and should not be used out-
side this range. The climate range of the
appliance is stated on the data plate in-
side the appliance.
Climate
Room temperature
class
SN
50°F to 90°F / 10°C to 32°C
N
60°F to 90°F / 16°C to 32°C
ST
60°F to 100°F / 16°C to
T
60°F to 109°F / 16°C to
Operating in a room which is too cold
will cause the compressor to turn off for
too long, causing the internal tempera-
ture in the appliance to rise, resulting in
damage.
Ventilation
WARNING! Fire hazard!
Operation of the machine is limited.
Keep the ventilation grille free from
obstruction.
Air at the back wall of the machine gets
warm.
Do not cover or obstruct the air
grille to allow for effective venting. It
must also be cleaned on a regular
basis to remove dust.
38°C
43°C
Installing the appliance
Two people are required to install
the appliance.
The appliance must be empty
when it is installed.
Move the appliance carefully on
floors that are sensitive to scratching
to prevent damage.
For easier installation, there are trans-
port handles on the back at the top of
the appliance and transport wheels
underneath.
Wall gap
The declared energy consumption will
be achieved if a wall gap of at least
2" (51 mm) is maintained between the
back of the appliance and the wall.
A smaller wall gap will not affect the
functionality of the appliance, but it
will increase energy consumption
slightly.
Installation
73
Advertisement
Table of Contents
