Table of Contents
Advertisement
For the automatic ice maker to oper-
ate, it must be connected to a water
supply (see "Water connection").
CAUTION
The first three batches of ice cubes
made after the ice maker is started
up must not be consumed, as the
water will have been used for the ini-
tial rinse through the water supply
line.
This applies to the initial commis-
sioning as well as when using the
appliance again after it has been
turned off for a long while.
Making ice cubes
Turning on the ice cube maker
Only make normal domestic quantities
of ice cubes with the ice cube maker.
After the initial commissioning of the
machine, it can take up to 24 hours for
the first ice cubes to drop out of the
ice cube maker and collect in the
drawer.
After the ice cube maker has been
turned off and on again, this process
lasts max. 6 hours.
Check whether the non-return valve
in the water supply line is open.
Touch the sensor button.
The display LED will light up.
If it was not turned on before, the
freezer section now turns on automati-
cally. As soon as the water is frozen, the
ice cubes drop out of the ice cube
maker into the ice cube container.
When a certain volume is reached, ice
cube production is automatically ad-
justed.
Ice cubes can only be made when the
ice cube drawer is completely closed.
If the ice cube maker indicator
light flashes, the ice cube maker has
an insufficient supply of water. Check
that the water inlet is open.
45
Advertisement
Table of Contents
