Onscreen Displays And Data Code - Canon XA11 Instruction Manual

Onscreen Displays and Data Code

Onscreen Displays and Data Code
You can turn most onscreen displays on or off.
Operating modes:
Repeatedly press the DISP. button to turn the onscreen displays on/off in the following
sequence:
86
mode:
• All displays on
• Onscreen markers
• Displays off
2
mode :
• Only data code on
• All displays on
1
The onscreen markers will be displayed only when [FUNC.]
[MENU]
> p
than [j Off].
2
Pressing D has the same effect as touching the screen. During
single photo view and while playing back a scene, the playback
controls are displayed only momentarily.
About the Data Code
With every scene or photo recorded, the camcorder keeps a data code (date/time of recording,
information about the camera setup, etc.).
You can select the information to be displayed with the [MENU]
setting. Note that available options depend on the type of recording.
1
[Onscreen Markers] is set to an option other
>
>
s /
>
[Data Code]
>