Table of Contents
Advertisement
Menu item
[Reset All]
[No], [Yes]
* The default settings are as follows. [Assign Button 1]: [
[Assign Button 3]: [j Off], [Assign Button 4]: [j Off], [Assign Button 5]: [
** Option available only when the optional GP-E2 GPS Receiver is attached to the camcorder.
Adjusts the brightness of the LCD screen.
[LCD Brightness]:
• Changing the brightness of the LCD screen does not affect the brightness of your recordings or the
brightness of the playback image on a TV.
[LCD Backlight]/[Viewfinder Backlight]:
screen) or two brightness levels (for the viewfinder).
• Changing the brightness of the screen does not affect the brightness of your recordings or the
brightness of the playback image on a TV.
• Using the [H Bright] setting will shorten the effective usage time of the battery pack.
: When this setting is set to [i On], this function reverses the image on the screen
[LCD Mirror Image]
horizontally when you rotate the LCD panel 180 degrees toward the subject. In other words, the
screen will show a mirror image of the subject.
A beep will accompany some of the camcorder's operations.
[Notification Sounds]:
• While pre-recording (A 85) is activated, the camcorder will not emit any notification sounds.
Activates the tally lamp when the camcorder is recording, the battery level is low or a
[Tally Lamp]:
memory card is full. When set to [j Off], the tally lamp will not turn on in these cases. The tally lamp
is located on the handle unit so make sure you attach it to the camcorder in advance.
Determines the operation mode of the assignable button set to [È Powered IS]
[Powered IS
Button]:
(A 56).
[Î Press and Hold]: Powered IS will be activated while you hold the button pressed down.
[Ï Toggle On/Off]: Each press of the button will turn the Powered IS function on and off.
Convenient for times when you need to use a particular white balance setting
[Set WB
Priority]:
frequently. You can press an assignable button set to [Ä WB Priority] to switch between the current
white balance and the white balance setting selected for [Set WB Priority].
Changes the direction the focus/zoom ring needs to be turned. This setting
[Focus Ring
Direction]:
affects the focus/zoom ring only when using it to adjust the focus (when the focus/zoom ring switch is
set to FOCUS).
Selects the sensitivity of the response when operating the focus/zoom ring.
[Focus Ring
Response]:
This setting affects the focus/zoom ring only when using it to adjust the focus (when the focus/zoom
ring switch is set to FOCUS).
Determines the speed at which the focus changes to the preset position.
[Focus Preset
Speed]:
When you are using a battery pack that is compatible with Intelligent System, this option
[Battery Info]:
displays a screen where you can verify the battery charge (as a percentage) and the remaining
recording time (
mode) or playback time (
• If the battery pack is exhausted, the battery information may not be displayed.
Setting options
AF/MF], [Assign Button 2]: [z PRE REC],
Sets the screen to one of three brightness levels (for the LCD
mode).
Appendix: Menu Options Lists
y
}
Rec Review].
A
–
125
Advertisement
Table of Contents
