Table of Contents
Advertisement
Using Headphones
Using Headphones
Use headphones for playback or to check the audio level while recording. The following procedure
explains how to adjust the volume.
Operating modes:
82
1 Connect headphones to the × (headphone) terminal.
2 Open the [Headphone Volume] screen.
[FUNC.]
[MENU]
>
• Touching [FUNC.] is necessary only when performing the procedure in
3 Touch [Ô] or [Õ] to adjust the volume and then touch [X].
• You can also drag your finger along the volume bar.
To adjust the volume during playback
During playback, adjust the headphones volume the same way you adjust the speaker's volume
(A 95).
IMPORTANT
• When using headphones, make sure to lower the volume to an appropriate level.
NOTES
• Use commercially available headphones with a ∅ 3.5 mm minijack.
• When you are monitoring the audio, you can choose to synchronize the audio signal with the video
signal or monitor the audio in real time. Use the [FUNC.]
setting to select the method. Note that there will be a slight delay when you monitor in real time.
Regardless of the setting, however, the audio and video signals recorded will be synchronized.
[Headphone Volume]
>
q
>
mode.
[MENU]
>
>
q
>
[Monitor Delay]
Advertisement
Table of Contents
