Inserting And Removing A Memory Card; Initializing A Memory Card - Canon XA11 Instruction Manual

Using a Memory Card

Inserting and Removing a Memory Card

Make sure to initialize (A 32) all memory cards before using them with this camcorder.
1 Turn off the camcorder.
• Make sure the
2 Open the double memory card slot cover.
3 Insert the memory card straight, with the label facing
32
the front of the camcorder, all the way into one of the
memory card slots.
• You can also use two memory cards, one in each memory
card slot.
4 Close the double memory card slot cover.
• Do not force the cover closed if the memory card is not
correctly inserted.
To remove the memory card
Push the memory card once to release it. When the memory card springs out, pull it all the way out.
IMPORTANT
• Turn off the camcorder before inserting or removing a memory card. Inserting or removing the
memory card with the camcorder on may result in permanent data loss.
• Memory cards have front and back sides that are not interchangeable. Inserting a memory card
facing the wrong direction can cause a malfunction of the camcorder. Be sure to insert the memory
card as described in step 3.

Initializing a Memory Card

Initialize memory cards when you use them with this camcorder for the first time. You can also initialize
a memory card to permanently delete all the recordings it contains.
Operating modes:
1 Power the camcorder using the compact power adapter.
• Do not disconnect the power source or turn off the camcorder until the initialization is completed.
2 Open the initialization screen for the desired memory card.
[FUNC.] [MENU]
>
[Initialize]
• Touching [FUNC.] is necessary only when performing the procedure in
• In the initialization screen, touch [Complete Initialization] to physically erase all the data rather than
just clear the file allocation table of the memory card.
indicator is off.
POWER/CHG
[Initialize 8]
> >
[6 Mem. Card A] or [7 Mem. Card B]
> >
mode.