Table of Contents
Advertisement
• Secure Digital (SD) memory cards have a physical switch to
prevent writing on the card so as to avoid the accidental erasure of
the card's content. To write-protect the memory card set the
switch to the LOCK position.
Built-in Rechargeable Lithium Battery
The camcorder has a built-in rechargeable lithium battery to keep the date/time and other settings.
The built-in lithium battery is recharged while you use the camcorder; however, it will discharge
completely if you do not use the camcorder for about 3 months.
To recharge the built-in lithium battery: Connect the compact power adapter to the camcorder and
leave it connected for 24 hours with the camcorder off.
Disposal
When you delete movies or initialize a memory card, only the file allocation table is altered and stored
data is not physically erased. When you dispose of a memory card or give either to another person,
initialize it using the [Complete Initialization] option (A 32). Fill it up with unimportant recordings, and
then initialize it again using the same option. This makes recovering the original recordings very
difficult.
Safety Instructions and Handling Precautions
LOCK switch
143
Advertisement
Table of Contents
