Using The Av Out Terminal - Canon XA11 Instruction Manual

Connecting to an External Monitor
NOTES
• o When [FUNC.]
HDMI], the signal output from the HDMI OUT terminal will be determined by the [FUNC.]
> q >
• In mode, you can use the [FUNC.]
include the time code in the signal output from the HDMI OUT terminal.
104
• The HDMI OUT terminal on the camcorder is for output only. Do not connect it to an HDMI output
terminal on an external device, as this may damage the camcorder.
• There will be no video output from the AV OUT terminal while an external monitor is connected to
the HDMI OUT terminal.
• Correct operation cannot be guaranteed when connecting the camcorder to DVI monitors.
• Video may not be output correctly depending on the monitor. In such case, use another terminal.
• If you selected an option other than [k Automatic] and the connected monitor is not compatible
with the signal output from the camcorder, then HDMI output will stop.
• You can use the [FUNC.]
whether onscreen displays are embedded in the output video signal.

Using the AV OUT Terminal

The AV OUT terminal outputs a down-converted analog video signal and audio signal for connection
to monitors with a composite audio/video input.
[MENU]
> >
[HD/SD-SDI Output] setting.
[MENU]
>
[Output Terminal] is set to [
q >
[MENU]
> > q
[Output Onscreen Displays] setting to select
> q >
HD/SD-SDI &
[HDMI Time Code] setting to
>
[MENU]
>