Adjusting The Lens - D-Link DCS-6111 Quick Install Manual

Adjusting the Lens

Based on the live image retrieved from the camera, adjust the camera
lens by performing the following procedures:
Adjusting the Viewing Angle
Loosen the pan screw and turn the lens module left and right
until the desired position is achieved; tighten the pan screw once
completed.
Loosen the tilt screws on both sides of the camera, and turn the lens
module up and down until the desired position is achieved; tighten
the tilt screws once completed.
Loosen the image adjustment screw and turn the lens to adjust the
IP camera's image until the desired orientation is achieved, tighten
the image adjustment screw once completed.
Loosen
Adjusting Zoom and Focus
Loosen the zoom controller
and adjust the zoom factor by
moving the controller left and
right until the desired range is
achieved. Tighten the zoom
controller once completed.
Loosen the focus controller and adjust the focus range by moving
the controller left and right until the image is clear. Tighten the focus
controller once completed.
D-Link DCS-6111 Quick Install Guide
Adjusting the Lens
Tighten
Loosen Tighten
Loosen
Tighten
Tighten
Loosen
1