Hardware Installation - D-Link DCS-6111 Quick Install Manual

Fixed dome day & night network camera w/ wdr sensor

Hide thumbs Also See for DCS-6111:

Table of Contents

Hardware Installation

When Mounting to a Ceiling

Find a suitable place to install the

camera by using the alignment

stencil. Place the camera at the

desired operating location and

insert the screws through the two

holes located at the base of the

camera. Use screwdriver to tighten

and secure.

When Mounting to a Wall

Find a suitable place to install the

camera by using the alignment stencil

to find a desired operating location on

the wall. Drill two pilot holes where

the holes of the alignment stencil are

located. Insert the supplied plastic

anchors into the drilled holes, and

align the holes at the base of the

camera with the plastic anchors. Once

aligned, insert the provided screws

through the holes. Use screwdriver

to tighten and secure.

D-Link DCS-6111 Quick Install Guide

Table of Contents