Table of Contents
Advertisement
Problem
The oven does not heat up.
The lamp does not operate.
Steam and condensation settle
on the food and in the cavity of
the oven.
The display shows "12.00".
SERVICE DATA
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre.
The necessary data for the service centre is on the
rating plate. The rating plate is on the front frame of
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
INSTALLATION
WARNING! Refer to Safety chapters.
BUILDING UNDER
CAUTION! Only a qualified and
competent person must do the
installation of the appliance. If you do
not contact a qualified or competent
person, the guarantee becomes invalid
if there is damage.
Before you install the appliance, fit it with the
applicable hob from the table.
Possible cause
The fuse is blown.
The lamp is defective.
You left the dish in the oven for
too long.
There was a power cut.
We recommend that you write the data here:
Make sure that the fuse is the
cause of the malfunction. If the
fuse is blown again and again,
contact a qualified electrician.
Replace the lamp.
Do not leave the dishes in the
oven for longer than 15 - 20
minutes after the cooking
process ends.
Reset the clock.
the appliance cavity. Do not remove the rating plate
from the appliance cavity.
.........................................
.........................................
.........................................
Type
ZEE 6041
ZEV 6040
ZEV 6041
ZEV 6046
ELECTRICAL CONNECTION WITH THE HOB
The hob connection socket is at the top of the oven
cabinet. The hob has connection leads for the
cooking zones and the ground cable. The leads
have plug-in connectors. To connect the hob to the
oven, plug the connectors into the correct oven
sockets. The design of the plugs and sockets
prevents incorrect connections.
Remedy
Maximum power
7000 W
6000 W
6400 W
7600 W
21
Advertisement
Table of Contents
