Motorola MBP70SN User Manual page 8

• If your thermometer will not be used for a long time, remove battery to
prevent possible damage caused by chemical leakage. If the battery is
leaking, remove it carefully. Do not allow the leaking fluid to touch your bare
skin.
• Use of this product requires special precautions regarding electromagnetic
compatibility (EMC). It must be installed and put into service in accordance
with the EMC information provided. This unit can be affected by portable and
mobile RF communications equipment.
• All materials (e.g. ABS) intended to come into contact with patients have
passed the ISO 10993-5 and ISO 10993-10 standards test, whereby they
are non-toxic and non-allergenic, and do not produce irritation reactions.
However, the state of current scientific knowledge and technology being
incomplete, other potential allergic reactions may not yet be known.
Should you have an allergic reaction to the materials, please stop treatment
immediately and consult your physician.
• Store the thermometer in a dry, clean place. Do not expose the product to
chemical solvents, lint, dust, direct sunshine or high temperature.
• During use, the operator shall prevent simultaneous contact between the
battery and the patient.
• Do not maintain or service the device while it is in use.
• Should you experience any problems with this device (e.g. set-up,
maintenance or use), please contact Motorola customer service or your local
retailer.
• Should any unexpected operations or events occur, please report them to the
manufacturer.
Caution:
This device should not be used adjacent to or stacked with other equipment.
Should adjacent or stacked use be necessary, this device should be observed to
ensure normal operation in the configuration in which it will be used.
8 Important Safety Information