FORCE1 RC
DRONE INDICATOR LIGHT
NO.
The front and rear lights of the
1
drone flash light green rapidly.
Front and rear lights flash green
2
rapidly.
The front and rear lights alternate
3
flashing light green.
The front and rear lights alternate
4
flashing green.
The front and rear lights of the
5
drone alternate flashing green,
red and light green.
The front lights glow solid red, the
6
rear lights glow solid light green.
The front lights glow solid red, the
7
rear lights glow solid green.
The front lights glow solid red, the
8
rear lights flash red slowly.
The front lights glow solid red, the
9
rear lights flash red rapidly.
The front and rear lights flash
10
once, then stop for 1.5 seconds.
The front and rear lights flash
11
twice, then stop for 1.5 seconds.
The front and rear lights flash three
12
times, then stop for 1.5 seconds.
The front and rear lights flash four
13
times, then stop for 1.5 seconds.
18
STATUS
DESCRIPTION
The transmitter is not linked to the aircraft, and it
requires completing the signal connection steps.
The drone is in gyroscope calibration mode.
The drone is in horizontal compass calibration.
The drone is in vertical compass calibration.
The drone is in initialization detection mode.
No GPS signal, the drone is in gesture mode.
Good GPS signal, drone is preparing for GPS mode.
The drone is nearly low voltage, 1/4 of the battery is left.
The drone is in low voltage, only 1/6 of the battery is
remaining.
Something is wrong with the gyroscope.
Something is wrong with the barometer.
Something is wrong with the compass.
Something is wrong with the GPS module.
Need help?
Do you have a question about the F200C SPECTER and is the answer not in the manual?
Questions and answers