Power Connector Cable - HP Pavilion 14 Maintenance And Service Manual

Power connector cable

Description
Power connector cable
Before removing the power connector cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the display (see
To remove the power connector cable:
▲ Lift the power connector cable straight up and out of the computer.
Reverse this procedure to install the power connector cable.
Bottom cover on page
Battery on page 31).
Display assembly on page
29).
48).
Component replacement procedures
Spare part number
808155-021
57