DGS-1510/ME Series Metro Ethernet Switch Hardware Installation Guide
Feature
SFP+ Ports
PoE Ports
(DGS-1510-28LP/ME and DGS-1510-
28XMP/ME Only)
Description
•
DEM-310GT (1000BASE-LX, Single-mode, 10km)
•
DEM-311GT (1000BASE-SX, Mutli-mode, 550m)
•
DEM-312GT2 (1000BASE-SX, Multi-mode, 2km)
•
DEM-314GT (1000BASE-LHX, Single-mode, 50km)
•
DEM-315GT (1000BASE-ZX, Single-mode, 80km)
•
DGS-712 (1000BASE-T Copper SFP, 100m)
WDM Transceivers Supported:
•
DEM-302S-BXD/BCU (1000BASE-BX, Single-mode, 2km)
•
DEM-330T/R (1000BASE-BX, Single-Mode, 10km)
•
DEM-331T/R (1000BASE-BX, Single-Mode, 40km)
Compliant with the following standards:
•
IEEE 802.3ae compliance
•
IEEE 802.3z compliance
SFP Transceivers Supported:
•
All SFP and WDM transceivers listed in the SFP Ports section
(above) will also work in the SFP+ ports.
SFP+ Transceivers Supported:
•
DEM-431XT-DD (10GBASE-SR, 80m: OM1 & OM2 MMF, 300m:
OM3 MMF)
•
DEM-431XT (10GBASE-SR (w/o DDM), 80m: OM1 & OM2 MMF,
300m: OM3 MMF)
•
DEM-432XT-DD (10GBASE-LR, 10km)
•
DEM-432XT (10GBASE-LR (w/o DDM), 10km)
•
DEM-433XT-DD (10GBASE-ER, 40km)
•
DEM-433XT (10GBASE-ER (w/o DDM), 40km)
•
DEM-434XT (10GBASE-ZR (w/o DDM),
•
DEM-436XT-BXU (10GBASE-LR BiDi (w/o DDM), 20km, TX:
1270nm, RX: 1330nm)
•
DEM-436XT-BXD (10GBASE-LR BiDi (w/o DDM), 20km, TX:
1330nm, RX: 1270nm )
Direct Attached Cables (DAC) with built-in transceivers:
•
DEM-CB100S (10G, SFP+ to SFP+, DAC, 1m)
•
DEM-CB300S (10G, SFP+ to SFP+, DAC, 3m)
•
DEM-CB700S (10G, SFP+ to SFP+, DAC, 7m)
•
Supports IEEE 802.3af PoE and IEEE 802.3at PoE+ compliance
•
Supplies power (ports 1 to 24) to PD devices up to 15.4 Watts
per port (802.3af) or 30 Watts per port (802.3at) and more
sufficiently is able to provide power to PD devices.
•
The auto-discovery feature automatically recognizes the
connection of the PD device and immediately provides power.
•
Automatically disable ports if the port current is over 600mA
while. Other ports will remain active.
•
Active circuit protection automatically disables the port if there is
42