LG 43UV570H Setup Manual page 73

Reference: FTG Mode via EBL (Local Configuration) (Cont.)
(Continued from previous page)
5. "Write" the FTG Channel Map to the EBL (switches the EBL from Pass-through Mode to FTG Mode).
Note: After a "Write" of new data, the TV will briefly display a green text banner that shows the EBL
firmware version and release date.
6. "Read" the current FTG Installer Menu settings from the EBL using the FTG Installer Menu Configuration
Utility. If necessary to make changes to Installer Menu items, "Write" them back to the EBL in FTG Mode.
Note: When you "Read" the settings from the EBL, a pop-up notice will be displayed (see example
below) to indicate that the chassis ID of this model is unknown and so a generic Installer Menu profile
will be loaded. Click OK to dismiss the pop-up window and continue. The resulting "generic" profile
contains all Installer Menu items, including a number of items that may not be applicable for this model.
Refer to the Installer Menu section of this document for detailed information on Installer Menu items
that are specific to the UV570H/UV572H, and make any changes necessary.
7. Save the FTG Channel Map and FTG Installer Menu settings to an FTG Configuration (.rml) file for
future use.
8. Tune the TV to a logical channel in the FTG Channel Map.
206-4325
73